Lamellas Panel – Catania Oak

Decorative slats are mounted on the wall as a decorative element, which also significantly improves the acoustics of the room reducing reverberation.

The product consists of a panel made of varnished board HDF and decorative strips permanently attached to panel, which makes installation much easier.

The length of the slats is 2750 mm. We mount them to the intended location onto the surface using mounting adhesive or screwing them to the wall by previously drilling holes in the appropriate one panel location.

Price: £65.00 per Pack (2 Panels) including VAT & excluding delivery

Size: 183 mm x 2750 mm

Area covered per pack: 1.0 m2

Delivery: £50.00/delivery (Within 25 miles radius from WF13)

How to Fit:

DECORATIVE SLATS INSTRUCTIONS

TOOLS:
Prepare: pencil, knife, tape measure, level, wood saw, glue or wood connector plates.

BEFORE INSTALLATION
1. Gently cut open the packaging and then check each panel for manufacturing defects.
REMEMBER: no complaint will be accepted after installation!
2. Ensure that the substrate is clean and dry, free of paint residue, glue, dust and providing adequate adhesion.
3. Drawing preliminary guidelines on the wall will help in precise installation of the slats.
4. Measure the wall and then cut the slats keeping a gap of approximately 2 – 3 mm from the floor.

INSTRUCTIONS 
1. Install the slats with glue starting from the left to the right side (fig.1,2), with the exception of the external corners (fig.3) – their installation should be carried out from the corner, installing the panels in the left and right direction. The arrows indicate the direction of installation.
2. Apply the adhesive to the panel in an „S” shape or linearly keeping a distance from the edges.
3. Place the first slat, then check the plumb, level and fix it by pressing it to the wall. If it needs to be moved, you can do so within minutes of gluing it by gently moving the panel without detaching it from the surface.
4. Fixing the panel to the substrate is only possible with suitable screws or dowels designed for the respective substrate type. To do this, drill a suitable hole in the panel.
5. The slats can be fixed both to the ceiling and to the wall in three variations: vertically,
horizontally or diagonally.
6. Installation in corners is possible both with or without 45° angle cut.

REMEMBER
1. Slats are designed for indoor use only.
2. Do not install the slats in rooms where temperatures might rise above 60°C.
3. It is not advisable to load the slats, e.g. by attaching shelves to, nor should the slats have a load-bearing function in the structure.